Is pwnage tool 3.1.4 jailbreak restoreable?

[cephei]

Hi,

I had trouble with the blackra1n jailbreak so im looking into using pwnage tool 3.1.4 for my 3GS 3.1.2 instead because I hear its a good alternative.

I just want to make sure I can restore back to normal if I need to if something goes wrong. Im not extremely good with these things and the 'custom ifsw' is kinda making me nervous..

I assume that I can get a factory apple ifsw and just do a normal restore if needed? Just dont want to get stuck and not be able to restore to normal.

Also do I need to be connected to the internet on my mac when im jailbreaking or can I just run the pwnage tool without the internet? (my mac isnt connected to the internet currently)

Cheers

 

[ph0enix]

Hi,

I had trouble with the blackra1n jailbreak so im looking into using pwnage tool 3.1.4 for my 3GS 3.1.2 instead because I hear its a good alternative.

I just want to make sure I can restore back to normal if I need to if something goes wrong. Im not extremely good with these things and the 'custom ifsw' is kinda making me nervous..

I assume that I can get a factory apple ifsw and just do a normal restore if needed? Just dont want to get stuck and not be able to restore to normal.

Also do I need to be connected to the internet on my mac when im jailbreaking or can I just run the pwnage tool without the internet? (my mac isnt connected to the internet currently)

Cheers

I have jailbroken my old 3G iPhone several times using Pwnage tool in the past. However I've not been able to jailbreak my new 3G S (using pwnage tool 3.1.4). I get error 1600 when I try to restore the custom firmware in recovery mode and error 1604 when I do it in the DFU mode. I didn't have any problems restoring the original ipsw though after that so you should be ok. Just be sure to backup the phone before you begin.

 

[cephei]

I have jailbroken my old 3G iPhone several times using Pwnage tool in the past. However I've not been able to jailbreak my new 3G S (using pwnage tool 3.1.4). I get error 1600 when I try to restore the custom firmware in recovery mode and error 1604 when I do it in the DFU mode. I didn't have any problems restoring the original ipsw though after that so you should be ok. Just be sure to backup the phone before you begin.

Do you know where I can download the original isfw or is it always on itunes as the default restore if you dont 'right click restore' and select a custom ifsw..?

 

[ph0enix]

Do you know where I can download the original isfw or is it always on itunes as the default restore if you dont 'right click restore' and select a custom ifsw..?

If the phone is in recovery or DFU mode, iTunes will detect it and download the correct ifsw when you click the Restore button - if I recall, there is an option to restore and update. Your Mac/PC needs to be connected to the Internet though. I used the iTunes ipsw to create my custom software with Pwnage tool but I'm unable to restore it on the 3G S. I really miss my Intelliscreen app that I had on my jailbroken 3G.

 

[cephei]

tried jailbreaking with pwnage 3.1.4 but I ended up getting an error in itunes after I selected the custom isfw I got an error saying 'unable to restore: error 1604... Kinda fed up of trying to jailbreak now..lol

 

[LVCIFER]

It's iPsw.

DFU RESTORE

Try the steps listed below, but make sure that you have downloaded the latest version of iTunes before attempting to do this.

Put the iPhone into DFU mode so you can do an iTunes firmware restore follow these steps:

Step One
Open iTunes and connect the iPhone to your Mac or PC.

Step Two
Press and hold the Home button and the Sleep/Wake button at the same time.

Step Three
After exactly 10 seconds, release the Sleep/Wake button. Continue holding the home button until iTunes pops up with a message telling you that it has detected an iPhone in recovery mode.

The iPhone screen will remain black.

NOTE***: It may take a few attempts to get your iPhone into DFU mode. Generally, I hold down both buttons then release the Home button just before I think the Apple logo would appear. If you are still holding both buttons down and you see the Apple logo you are holding them down for too long!

Step Four
Download from iTunes and install the latest firmware (3.1.2/7D11) and install it. Then, when it's done, simply either restore it from a previously created backup, or set it up as a new iPhone and re-sync all of your stuff back onto it.

And, here is the best method to jailbreak the 3G.

JAILBREAK/UNLOCK IPHONE 3G

Don't download any firmwares from any sites. There's no need to even use PwnageTool right now either. Connect your 3G to iTunes. (Hopefully, you're running the newest version of iTunes) When it asks you if you want to update your iPhone, SAY YES. This will erase any an all jailbreak and unlocks previously there. DON'T PANIC.

Download and install the official firmware, 3.1.2 from iTunes.

Go to blackra1n.com and download blackra1n.

Now, after you restore from iTunes, when everything is about 98% done, it will ask you to insert the SIM card that came with your phone from AT&T. If you have AT&T, great. If you don't, a/k/a T-Mobile, INSERT THAT SIM CARD, and then follow these instructions.

Open up blackra1n on your PC, and then click "Make it rain" and jailbreak your phone. This will also 'hacktivate' your phone with your alternate SIM card. (Note: follow directions at the end of this post to fix Push Notifications, YouTube and Wi?Fi for hacktivated iPhones)

YOU MAY NEED TO ATTEMPT THIS MULTIPLE TIMES FOR IT TO WORK CORRECTLY. Sometimes there are minor errors. Let it do it's thing. It is okay and even somewhat expected.

Once blackra1n.app is installed to your springboard (a/k/a iPhone home screen), choose to install "sn0w"( a/k/a blacksn0w) from your iPhone. Once again, make sure it that you connect to Wi?Fi first. It will be the only way you can install Cydia/Rock if you're not on AT&T.

1) Open up the "blackra1n.app" on your iPhone.
2) Tap on "sn0w" until a green check mark appears next to it.
3) Tap "install".
4) Watch for the splash screen telling you that it was successful.
5) Turn your iPhone off.
6) Insert your SIM card.
7) Turn the iPhone back on.

After installing sn0w, install Cydia.

1) Open up the "blackra1n.app" on your iPhone.
2) Tap on "Cydia" until a green check mark appears next to it.
3) Tap "install".

Cydia will ask you questions, and to update. Select "Graphical User", and "Update All". Let it restart and reboot. Once it does it's thing...

-OPTIONAL-
If you have data or MMS problems with ANY carrier, you may want to google or wikipedia "iPhone APN Settings" to find a way to fix those issues. However, if the plan for the cell carrier SIM card you've inserted does not include data, then your Internet/e-Mail/maps/gps etc won't work. You will have to add data/MMS to that SIM cards plan for them to officially work.

Voil?. You're updated, jailbroken, and unlocked on the newest OS.

ADDITIONAL NOTES:
For some, the new blackra1n HACKTIVATED jailbreak was causing problems with Wi-Fi, YouTube, and Push Notifications. Here is a quick guide on how to fix these problems.

Wi?Fi
1. Go to Settings>General>Reset>Reset Network Settings, then click "OK"
2. Reboot your iPhone, when it comes back on Wi?Fi should be fixed, but next time you reboot you have to do this again.

YouTube and Push Notifications for "hacktivated" iPhones.

1. Go to Cydia
2. Tap Manage at the bottom
3. Tap Sources
4. Tap edit in the right hand corner
5. Tap add.
6. Type cydia.iphoneil.net
7. Tap done
8. Search for "PushFix" and tap on the first result
9. Install then confirm
10. Reboot your iPhone.