1. Rubley21's Avatar
    AFTER MUCH ATTEMPTED RESEARCH TO SOLVE THE PROBLEM MYSELF, THIS IS MY LAST RESORT AND I AM ASKING YOU FOR YOUR HELP.


    Hello All,

    ----------iPhone 3gs - 5.0.1 / 6.15.00 / OLD BOOTROM---------

    GOAL: UNLOCK for T-Mobile.

    Purchased iPhone off internet > updated to ipad bb > Jailbroke > installed ultrasn0w > NO SERVICE=NOT UNLOCKED

    I then proceeded to look for a solution to this problem. I found this ultrasn0w fixer file, continued to follow directions. Ended up not working due to me not uninstalling ultrasn0w before following the steps.

    So I figured start all over, fresh jailbreak. Ran Redsn0w beta 8 and received this horrible, HORRIBLE error

    Please wait...
    Please wait...
    Please wait...
    ...60000ms error...

    The phone is currently in a recovery loop and I am struggling to fix the problem.

    I have tried:
    -Using redsn0w beta 9 and received a 'panic: we are hanging here'
    -Using Greenpois0n and receiving an error followed by 'Greenpois0n initialized'
    -Letting iTunes stock restore > error > DFU > Redsn0w's JUSTBOOT button > Then hung up on the pineapple followed by recovery loop.


    I understand that my solution might have something to do with TinyUmbrella, however I am not very familiar nor have I used TU/shsh blobs in the past.

    Please feel free to spill your Jailbreak knowledge. THANK YOU
    12-20-2011 10:25 PM
  2. iDonev's Avatar
    Of you're on a PC, have you tried using sn0wbreeze instead of redsn0w?
    12-21-2011 04:39 AM
  3. ovidiu1305's Avatar
    Restore a custom 5.0.1 firmweare made with snowbreeze, then unlock with the new ultrasn0w for 5.0.1(be carefull to activate the phone before unlocking, either with official sim ir hactivate it). If still not working downgrade to a custom 4.1 firmware , then unlock. If you are new to snowbreeze i made a tutorial about using it here http://forums.tipb.com/jailbreak-unl...very-mode.html
    12-23-2011 11:56 AM
  4. iPhoneklr's Avatar
    by a new one and leave it alone
    12-23-2011 10:50 PM
  5. bakhtiar's Avatar
    AFTER MUCH ATTEMPTED RESEARCH TO SOLVE THE PROBLEM MYSELF, THIS IS MY LAST RESORT AND I AM ASKING YOU FOR YOUR HELP.


    Hello All,

    ----------iPhone 3gs - 5.0.1 / 6.15.00 / OLD BOOTROM---------

    GOAL: UNLOCK for T-Mobile.

    Purchased iPhone off internet > updated to ipad bb > Jailbroke > installed ultrasn0w > NO SERVICE=NOT UNLOCKED

    I then proceeded to look for a solution to this problem. I found this ultrasn0w fixer file, continued to follow directions. Ended up not working due to me not uninstalling ultrasn0w before following the steps.

    So I figured start all over, fresh jailbreak. Ran Redsn0w beta 8 and received this horrible, HORRIBLE error

    Please wait...
    Please wait...
    Please wait...
    ...60000ms error...

    The phone is currently in a recovery loop and I am struggling to fix the problem.

    I have tried:
    -Using redsn0w beta 9 and received a 'panic: we are hanging here'
    -Using Greenpois0n and receiving an error followed by 'Greenpois0n initialized'
    -Letting iTunes stock restore > error > DFU > Redsn0w's JUSTBOOT button > Then hung up on the pineapple followed by recovery loop.


    I understand that my solution might have something to do with TinyUmbrella, however I am not very familiar nor have I used TU/shsh blobs in the past.

    Please feel free to spill your Jailbreak knowledge. THANK YOU
    Hi,
    The Solution for ultrasn0w unlock problem in 6.15.00 BB 3GS (new bootrom), l found is, to re-flash the BB 6.15.00.
    I myself, was stuck for full two days/nights facing this problem, while upgrading to innocent 4.3.3 from my iphone 3gs 4.1 fw and 6.15.00 BB (old bootrom). I checked all through the net and found this strange problem faced by many people and there is no logical answer from anyone! And also what i found that, the problem faced by the person who were previously in 6.15.00 BB and now want to do something with their iPhone.
    so, the issue is what ever i did i was ending the process (i.e. redsn0w, sn0wbreeze, IReb rc4, tinyumbrella, Device manager and i don't know how many more) of jailbreaking process with corrupted 6.15.00 BB! So whatever the version of ultrasn0w i used, and what ever i did after that (modifying the root files, carrier .plist etc) i ended up as "No Service" or one bar or no carrier option in the settings.
    so, the sum up of the solution is:

    You need, Redsn0w, Sn0wbreeze, 4.1 IPSW stock FW
    Step 1.
    Downgrade your FW to 4.1 (this worked for me) using sn0wbreeze (Unless u don't know how to use sn0wbreeze, it's same like redsn0w but it can customize the stock FW of 4.1 so that itunes cannot throw the 1015 error). U can use sn0wbreeze version 2.1 (which works for FW 3.2.2 to 4.1) to do this. Follow the screen intructions. One thing more, if you find problem going to DFU mode use
    redsn0w_win_0.9.9b9 (use the 'extras' > pwned DFU & can also use other version too). And if you still he itunes 1015 error use iReb to get out of this.

    Step 2.
    Use the redsn0w_win_0.9.6rc16 version (U can also use other version too) to install the 6.15.00 ipad BB only. This is the main step which will make your BB suitable for ultrasn0w 1.2 or above to unlock. Unmark any other option like install Cydia etc.

    Step 3
    Unlock with ultrasn0w 1.2 or above (whatever the method with or without wifi). Reboot the device. If the settings>carrier option enabled, u r done. Give it 3-5 minutes for the first time to search for the carrier. that's it.

    Sorry that I have taken so much time, coz i was frustrated myself once and i don't want to see anyone like me with 6.15.00 BB.

    Bakhtiar
    --From Dhaka
    12-26-2011 09:40 AM
  6. jailbreakmatrix's Avatar
    there are latterly 100s of guides, but i would use the tools released today, create a custom ispw and upgrade
    12-27-2011 11:38 AM
LINK TO POST COPIED TO CLIPBOARD