1. Drummer Ben's Avatar
    I believe my problem is getting the cables on the LCD to stay on the motherboard. I am trying to fit a new LCD on my iPhone 6 Plus. This is an LCD that came off of a working iPhone 6 Plus. At first I couldn't get a picture to show. After taking the screen apart and trying again I get a picture but touch is very unresponsive, inaccurate. There also is a few lines showing up on the screen. Any advice for getting the cables to stay? I am screwing in the metal shield with every try.
    03-28-2015 01:58 AM
  2. qbnkelt's Avatar
    I believe my problem is getting the cables on the LCD to stay on the motherboard. I am trying to fit a new LCD on my iPhone 6 Plus. This is an LCD that came off of a working iPhone 6 Plus. At first I couldn't get a picture to show. After taking the screen apart and trying again I get a picture but touch is very unresponsive, inaccurate. There also is a few lines showing up on the screen. Any advice for getting the cables to stay? I am screwing in the metal shield with every try.
    My suggestion, really, is to take it to an authorised repair shop. Or to Apple. How long have you had the device? It might have still been under warranty.
    03-28-2015 04:29 AM
  3. IAmSixNine's Avatar
    What are we missing from this story? If you got an LCD off another iPhone 6 plus then its not a new screen. Its a used screen.
    So lets back track. What was wrong with the iPhone 6 plus that you got the screen from? Makes no sense to cannibalize a perfectly good working unit just to fix another. Were you using metal pry tools to get the connectors off? Did you press the new/used screen connectors to hard when installing it? There are many things that can and will go wrong when you try to do something your not familiar with. Im not saying you did but theres a lot of missing info. I work on these for a living and i have learned a lot by trial and error.
    03-28-2015 04:46 PM
  4. SeanHRCC's Avatar
    Out of curiosity...are you ONLY replacing the LCD or did you replace the digitizer as well? Assuming you did this because of damage to the original screen, there's a pretty good chance the digitizer was also damaged, and could be why you're not getting accurate touch response.

    Also, many of the screen replacements online are cheap junk...you mentioned it came off a working iPhone 6 Plus, but I have to ask, why would someone take a perfectly functioning 6 Plus screen off just to mount it on a broke 6 Plus? Why not just use the working 6 Plus?
    geekymcfly likes this.
    03-28-2015 06:17 PM
  5. HankAZ's Avatar
    My suggestion, really, is to take it to an authorised repair shop. Or to Apple. How long have you had the device? It might have still been under warranty.
    The iPhone 6 Plus has only been out since September, so, it would have been under warranty. I guarantee that this one is not now.
    03-28-2015 07:35 PM
  6. Drummer Ben's Avatar
    No IAMSIXNINE I'm just saying this screen is oem, bought it on eBay. I was told it was taken off of an iPhone 6 plus. I did buy a full replacement digitzer/lcd with home button. Qbnkelt I really feel apple wouldn't even attempt fixing this. It looks as if someone ran over it and flattened it.

    Now, I completely destroyed my iPhone 6 Plus. Looked as if it were run over by a car. Wanted to retrieve all of the videos, voice memos and notes off of a the phone. Removed the motherboard from the wrecked iPhone 6 plus and camera. Bought a new motherboard housing and digitizer/lcd to place the motherboard and camera in. I successfully got the new zombie phone working and retrieved my data off the phone. The connection to the screen keeps coming loose though. I feel I may have bent one of the metal prongs or whatever you call it on one of the digitizer cables trying to get the cables to stay. Other than that everything works again. I've already spent $500 attempting to fix the phone. Should I buy another screen or does it sound like I just need to put the cables in properly. I can assure everyone everything else has been correctly put into place. Sound works, camera works, flash works, vibration works, cellular/wifi works. I guess I could replace the cables on the digitizer. I'll upload a pic of the messed up cable.
    Last edited by Drummer Ben; 03-28-2015 at 08:14 PM.
    03-28-2015 08:02 PM
  7. iEd's Avatar
    You spent $500 bucks trying to fix a 6 Plus? Why?





    From my iPhone
    Drummer Ben likes this.
    03-28-2015 08:07 PM
  8. HankAZ's Avatar
    You spent $500 bucks trying to fix a 6 Plus? Why?
    To get to the other side?


    Wait, wrong joke... I got nothing.
    03-28-2015 08:17 PM
  9. Drummer Ben's Avatar
    You spent $500 bucks trying to fix a 6 Plus? Why?
    Better than buying a new out of contract 128GB 6 Plus

    Anyways, this was my Friday night last night

    03-28-2015 08:19 PM
  10. iEd's Avatar
    Better than buying a new out of contract 128GB 6 Plus

    Anyways, this was my Friday night last night

    https://fbcdn-sphotos-h-a.akamaihd.n...388d882833b184
    Wow! What was initially wrong with it?
    03-28-2015 08:27 PM
  11. Drummer Ben's Avatar
    Here's the bent connector on the new digitizer that could be what is causing the problem. As far as what happened Ed was on my bike and got caught in my wheels.

    Last edited by Drummer Ben; 03-28-2015 at 10:29 PM.
    03-28-2015 09:45 PM
  12. trparky's Avatar
    If you had everything in iCloud you could have restored all of that data from iCloud onto your new device. You can do the same thing if you had backed up the iPhone to iTunes on your computer.
    Drummer Ben likes this.
    03-28-2015 10:01 PM
  13. iEd's Avatar
    With Apple Care Plus you could've gotten a new phone under a accidental damage claim. You get claims.
    Drummer Ben likes this.
    03-28-2015 10:36 PM
  14. Drummer Ben's Avatar
    Right, should have gotten a case for it too. What was initially wrong with it to answer your question I'd say battery was ripped in half, aluminum was all warped, screen was destroyed. Was surprised the motherboard was still intact. For the bent pins on the digitizer cable I guess I could try to bend them back with some pin point tweezers.
    03-28-2015 11:13 PM
  15. qbnkelt's Avatar
    The iPhone 6 Plus has only been out since September, so, it would have been under warranty. I guarantee that this one is not now.
    Yup, which is the sad thing. Now there are two broken Plus devices.


    Sent from my SEXY GORGEOUS AWESOME GOLD 128G iPhone 6
    03-29-2015 01:26 AM
  16. qbnkelt's Avatar
    Better than buying a new out of contract 128GB 6 Plus

    Anyways, this was my Friday night last night

    https://fbcdn-sphotos-h-a.akamaihd.n...388d882833b184
    But you never tried to find out through Apple.
    Look I know it's much too late now. And I know people like to tinker. I've got brothers and cousins and I grew up watching them struggle with disemboweled cars and radios and such. But really, Apple might have helped initially with whatever was wrong.

    Those pics are painful to look at. I'm sorry. Please consider Apple Care + for your next iDevice. It's what I always do.


    Sent from my SEXY GORGEOUS AWESOME GOLD 128G iPhone 6
    Drummer Ben likes this.
    03-29-2015 01:35 AM
  17. Drummer Ben's Avatar
    Hey, got my data back at least which was worth it right there. Still havn't given up yet and will post on here if I end up getting this to work,
    03-29-2015 02:55 AM
  18. cornettbr's Avatar
    Post some close ups of the ribbon cable connector and the digitizer I actually used to repair phones for sprint and I'm still an electrician now. I might be able to spot something.
    03-29-2015 07:20 PM
  19. IAmSixNine's Avatar
    Post some close ups of the ribbon cable connector and the digitizer I actually used to repair phones for sprint and I'm still an electrician now. I might be able to spot something.
    Check out the pic he posted in post #11.
    The connector on the bottom should have 2 straight rows, the row on the left is crooked, thats the problem. He may luck out if he is able to straighten them out but lets hope the didnt damage the board by trying to force the connectors together when they were bent.
    03-30-2015 08:41 AM
  20. barriecary's Avatar
    Wow!
    04-03-2015 02:21 AM
  21. Packer156's Avatar
    The issue stems from the Touch IC chip on the logic board failing. Below is a step by step guide:

    Step 1. Disassemble the phone.

    Step 2. Take out the iPhone logic board.

    Step 3. The Touch IC chip is on the back of the board, so you need to remove the protective backing to gain access.

    Step 4. Carefully use a hot-air soldering machine to remove the faulty Touch IC chip.

    Step 5. Install the new replacement Touch IC chip.

    Step 6. Test the phone and if it is working fine, then reassemble. DO NOT reassemble before making sure that the phone works perfectly.

    For more details you can search on hcqs blog.
    07-14-2016 10:58 PM

Similar Threads

  1. Replies: 2
    Last Post: 04-23-2015, 01:16 AM
  2. Replies: 20
    Last Post: 04-08-2015, 02:53 PM
  3. [Solved] iPhone 4s Restoring firmware stuck 99.9%
    By wiqionline in forum iPhone 4S
    Replies: 3
    Last Post: 03-31-2015, 03:56 PM
  4. Replies: 1
    Last Post: 03-28-2015, 02:38 PM
  5. I cannot get my ios6 to charge or come on. What can I do?
    By iMore Question in forum Ask a Question
    Replies: 2
    Last Post: 03-27-2015, 11:47 PM
LINK TO POST COPIED TO CLIPBOARD